Description
The WOOLTECH sandwich panel system with a rigid mineral wool core (MW) in metal cladding includes wall profiles with visible fastening (PWS2-MW-ST), wall profiles with concealed fastening (PWS2-MW-PL), roof profiles (PWD2-MW) and eco-profiles (PWS2-MW EKO).
Basic module widths of the profiles:
- Wall profile with visible fastening 1000 mm and 1150 mm;
- Wall profile with concealed fastening 1000 mm and 1050 mm;
- Roof profile with visible fastening 1000 mm and 1070 mm;
The connections (“fasteners”) used in the wall profiles have a conical shape, which has an effect on the following:
- Saving time and minimizing the risk of damage during installation;
- Ensuring correct water and air tightness;
- Improving the properties in the area of fire resistance and fire behavior;
- Increasing the load-bearing capacity of the panels;
External flat profiling (P) is only possible for sheet thicknesses over 0.6 mm.
CONNECTION OF THE ROOF PROFILES TO LENGTH
When connecting the roof profiles to length, it is necessary to cut the top panel.
WOOLTECH roof profiles can be manufactured with a cutting range of min. 50 to the max. 300 mm.
It is sufficient to choose the type of pruning, which is determined by the laying direction:
Pruning LEFT – mounting from the left
Pruning RIGHT – mounting from the right
The cut-back length can be up to: D = 50, 100, 150, 200, 250 and max. 300 mm.
NOTE: The total length of the panel includes the selected undercut length regardless of its size.
For example, a 6000 mm long panel with a 200 mm undercut = 6000 mm (5800 mm core 200 mm sheet).
